loading
▍Application
This vertical buffer is designed to have the function as LIFO, Loader, Unloader, Pass through, NG OK functions, which can be located between SMT machines to improve the working efficiency by buffering.
Communication method: RS-232 + SMEMA communication
The Mini buffer consists of a vertical buffer and a 500mm conveyor, and is placed in the line to balance board flow in LIFO buffer mode, act as a line splitter in Loader or Unloader mode, or good/bad board separator in Triggered mode. Width adjustment, work mode, and other functions, are all accessed from the hand control unit, which makes the unit easily managed.
In LIFO mode, boards are received from a preceding machine and are buffered when the subsequent machine is occupied. A board is lowered from the buffer and transported to the subsequent machine as soon as it becomes ready.
In Loader mode, a maximum of 10 boards can be manually loaded in the buffer to provide the subsequent machine with a constant board flow In Unloader mode, a maximum of 10 boards received from the preceding machine, are stored in the buffer for manual removal. In Triggered mode, boards signaled as bad (NG) from the preceding machine are stored in the buffer for manual removal, while good boards continue down the line to the subsequent machine
▍Features
Board transport level: 940 ± 30 mm (37 ± 1.2”)
Board length: 100 - 450 mm (3.9 - 17.7”)
Board width: 50 - 508 mm (2 - 20”)
Min. board thickness: 0.7 mm (0.028”)
Max. board weight: 3 kg (6.6 lbs)
Max. combined board weight in buffer: 15 kg (33 lbs)
Components clearance top: 20 mm (0.8”)
Components clearance bottom: 15 mm (0.6”)
Board edge clearance: 4 mm
Voltage: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 0.3 kWh
Air supply: 5-10 bar, 200 l/h (70-140 psi, 0.12 cfm)
Automatic width adjustment
Auto width control unit
See order guide for more options
SMEMA Interface
Air Pressure: 4-5kgf/cm2
Machine communication: SMEMA interface
▍Application
This vertical buffer is designed to have the function as LIFO, Loader, Unloader, Pass through, NG OK functions, which can be located between SMT machines to improve the working efficiency by buffering.
Communication method: RS-232 + SMEMA communication
The Mini buffer consists of a vertical buffer and a 500mm conveyor, and is placed in the line to balance board flow in LIFO buffer mode, act as a line splitter in Loader or Unloader mode, or good/bad board separator in Triggered mode. Width adjustment, work mode, and other functions, are all accessed from the hand control unit, which makes the unit easily managed.
In LIFO mode, boards are received from a preceding machine and are buffered when the subsequent machine is occupied. A board is lowered from the buffer and transported to the subsequent machine as soon as it becomes ready.
In Loader mode, a maximum of 10 boards can be manually loaded in the buffer to provide the subsequent machine with a constant board flow In Unloader mode, a maximum of 10 boards received from the preceding machine, are stored in the buffer for manual removal. In Triggered mode, boards signaled as bad (NG) from the preceding machine are stored in the buffer for manual removal, while good boards continue down the line to the subsequent machine
▍Features
Board transport level: 940 ± 30 mm (37 ± 1.2”)
Board length: 100 - 450 mm (3.9 - 17.7”)
Board width: 50 - 508 mm (2 - 20”)
Min. board thickness: 0.7 mm (0.028”)
Max. board weight: 3 kg (6.6 lbs)
Max. combined board weight in buffer: 15 kg (33 lbs)
Components clearance top: 20 mm (0.8”)
Components clearance bottom: 15 mm (0.6”)
Board edge clearance: 4 mm
Voltage: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 0.3 kWh
Air supply: 5-10 bar, 200 l/h (70-140 psi, 0.12 cfm)
Automatic width adjustment
Auto width control unit
See order guide for more options
SMEMA Interface
Air Pressure: 4-5kgf/cm2
Machine communication: SMEMA interface