loading
▍Application
This unit is used to automatically separate good boards and NG boards while allowing visual inspection for NG PCBs without any interruption on Good Board flow.It can work with any tester like AOI,SPI.
▍Features
Mitsubishi PLC program control
Touch screen operation panel
By-pass mode, inspection,NG reject mode selectable
Conveyor width adjustment by using hand crank.
Center PCB stop position
Heavy bottom design to prevent shifting
Conveyor motor is using with stepper motor
Total 5 NG PCBs stock capability
SMEMA compatible
▍Optional
Motorized conveyor width adjustment
Automatically conveyor width adjustment
R485 communication
▍Technical specification
Transfer heights | 900mm+/-50mm |
Transfer direction | Left to right |
Operation side | Front of machine |
Fixed rail | Front of machine |
Interface | SMEMA |
Conveyor belts | ESD flat belt |
PCB edge support | 3mm |
Allowable components clearance | Top 50 mm+ below 25mm |
NG PCB position length | 300mm |
NG PCB stock capacity | 5 PCS |
Max. PCB weights available | 3KG |
Safety | CE certificates |
Control | PLC |
Voltage | 350W,220V/ 110V , single phase, 50-60Hz |
▍Specification
RE-460 | |
Machine dimension | 1000mm*890mm*1050mm ( L*W*H) |
Weight | 150KG |
PCB size | 500mm *460mm ( L*W) |
▍Application
This unit is used to automatically separate good boards and NG boards while allowing visual inspection for NG PCBs without any interruption on Good Board flow.It can work with any tester like AOI,SPI.
▍Features
Mitsubishi PLC program control
Touch screen operation panel
By-pass mode, inspection,NG reject mode selectable
Conveyor width adjustment by using hand crank.
Center PCB stop position
Heavy bottom design to prevent shifting
Conveyor motor is using with stepper motor
Total 5 NG PCBs stock capability
SMEMA compatible
▍Optional
Motorized conveyor width adjustment
Automatically conveyor width adjustment
R485 communication
▍Technical specification
Transfer heights | 900mm+/-50mm |
Transfer direction | Left to right |
Operation side | Front of machine |
Fixed rail | Front of machine |
Interface | SMEMA |
Conveyor belts | ESD flat belt |
PCB edge support | 3mm |
Allowable components clearance | Top 50 mm+ below 25mm |
NG PCB position length | 300mm |
NG PCB stock capacity | 5 PCS |
Max. PCB weights available | 3KG |
Safety | CE certificates |
Control | PLC |
Voltage | 350W,220V/ 110V , single phase, 50-60Hz |
▍Specification
RE-460 | |
Machine dimension | 1000mm*890mm*1050mm ( L*W*H) |
Weight | 150KG |
PCB size | 500mm *460mm ( L*W) |