You are here: Home / Products / PCB Handling Series / Conveyor / UV Inspection Conveyor

UV Inspection Conveyor


Availability:

Quantity:

Inquire Add to Basket

Product Description

▍Application

This unit is placed at the conformal coating process line as a inspection station to check the conformal coating quality by visual inspection. This UV inspection conveyor is with the air exhaust interface and air pressure sensor to monitor the air flow.

▍Features

Mitsubishi PLC program control
Touch screen operation panel
By-pass mode, inspection mode selectable
Conveyor width adjustment by using hand crank
Center PCB stop position
Heavy bottom design to prevent shifting
Conveyor motor is using with stepper motor
Covers which protect the boards against dust
2-segment independent conveyor speed control
UV lights to analyze the coating result over the boards
Exhaust sensor which forces to use air extraction
SMEMA compatible
Inspection interval can be setting by software

▍Optional

Inspection interval can be setting by software.
Motorized conveyor width adjustment
Automatically conveyor width adjustment
R485 communication

▍Technical specification

Transfer heights	900mm+/-50mm
Transfer direction	Left to right
Operation side	Front of machine
Fixed rail	Front of machine
Interface	SMEMA
Conveyor belts	ESD flat belt
PCB edge support	3mm
Allowable components clearance	Top 80 mm+ down 40mm
UV lights	2 Groups
Inspection interval	Setting by software
Safety	CE certificates
Control	PLC
Voltage	220V/ 110V , single phase, 50-60Hz

▍Specification

	PTB-460SE-1000 / 1000IN
Machine dimension	Length (mm) 950mm 950mm ( LWH) Length is available for 500mm,600mm,800mm,1000mm,1500mm,2000mm
Weight	80KG ( depends on different length of conveyor)
PCB size	560mm 460mm ( LW)