You are here: Home / Products / PCB Handling Series / Loaders & Unloaders / Bare Boards Loader Destacker

Bare Boards Loader Destacker


Availability:

Quantity:

Inquire Add to Basket

Product Description

▍Application

This unit is design for loading the bare boards onto the SMT line. Unique separation cams take one PCB from the bottom of the boards stacked, and softly lowering it on the ESD belts to transfer to downstream machine.

▍Features

Mitsubishi PLC program control
By-pass and destacker mode are selectable in the software
Shortest loading cycle time for PCB
Thickness 0.6 mm PCB available to be handled
Uninterrupted PCB charging
Pre-signal alarm for PCB lower stack heights
Use the friendly touch screen panel
Smooth and parallel width adjustment by crank wheel ( Optional: motorized).
Interlock for all door open to improvement highest safety operation
SMEMA compatible

▍Technical specification

Transfer heights	900mm+/-50mm
Transfer direction	Left to right
Operation side	Front of machine
Fixed rail	Front of machine
Interface	SMEMA
PCB working cycle time	3s-7s ( adjustable)
Conveyor belts	ESD flat belt
PCB edge support	3mm
Components clearance	20mm below and above
PCB thickness available	0.6mm-3.5mm
PCB stack heights	240mm / specify
Air supply	4-6 bar
Safety	CE certificates
Control	PLC
Voltage	220V/ 110V , single phase, 50-60Hz