Call Us
+86-15017908688
Website
www.synspeed.com
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
loading
▍Application
The Automatic Unloader is designed for unloading of PCBs, an arriving PCB is taken up by the attached conveyor and then pushed into the magazine by a specially designed pusher. The magazine indexes to the next position and is ready for the following unloading cycle. Connect with SMT and AI production line, safety design ensures not to break any PCB when it is pushed and thus reduce defect rate. Agility operation with high accuracy, automatic counting, fault alarm functions, it is required for a full range of automatic equipment.
▍Features
Magazine capacity: Top 1+ Middle 1+Down 2, total 4 magazines.
Full CE regulations safety cover
Selectable pitch 10mm up to 80mm
Auto/Manual run modes
Diameter 3mm edge Flat ESD belt
Component clearance: top 80mm bottom 25mm
Power: AC220V/110V, 50/60 HZ, 1 phase
Air Pressure: 5kgf/cm2
PCB Convey Direction: L-R ( Or R-L)
Front rail fixed ( or rear rail fixed)
Conveyor height:900+50/-20mm (Standard height for SMT application)
For AI application, please specify the height requirements
▍Technical specification
Transfer heights | 900mm+/-50mm |
Transfer direction | Left to right |
Lifting platform Max. weight loading | Above 100kg |
Operation side | Front of machine |
Fixed rail | Front of machine |
Interface | SMEMA |
Conveyor belts | ESD flat belt |
PCB edge support | 3mm |
Magazine change over time | 30s ( optional: 15s) |
Allowable components clearance | Top 50 mm+ below 25mm |
Magazine capacity | Top 1+down 2+ middle 1 |
Safety | CE certificates |
Control | PLC |
Voltage | 220V/ 110V , single phase, 50-60Hz |
▍Specification
Model | Max. PCB ( L *W) MM | Min.PCB(MM) | Machine Dimensions (L*W*H) MM | Magazine size |
SUL-250M-E | 330*250 | 50*50 | 1815*740*1650 | 355*320*563 |
SUL-330L-E | 440*330 | 2130*830*1650 | 460*400*563 | |
SUL-390L-E | 530*390 | 2400*1020*1650 | 535*460*570 | |
SUL-460L-E | 535*460 | 2400*1020*1650 | 535*530*570 |
▍Application
The Automatic Unloader is designed for unloading of PCBs, an arriving PCB is taken up by the attached conveyor and then pushed into the magazine by a specially designed pusher. The magazine indexes to the next position and is ready for the following unloading cycle. Connect with SMT and AI production line, safety design ensures not to break any PCB when it is pushed and thus reduce defect rate. Agility operation with high accuracy, automatic counting, fault alarm functions, it is required for a full range of automatic equipment.
▍Features
Magazine capacity: Top 1+ Middle 1+Down 2, total 4 magazines.
Full CE regulations safety cover
Selectable pitch 10mm up to 80mm
Auto/Manual run modes
Diameter 3mm edge Flat ESD belt
Component clearance: top 80mm bottom 25mm
Power: AC220V/110V, 50/60 HZ, 1 phase
Air Pressure: 5kgf/cm2
PCB Convey Direction: L-R ( Or R-L)
Front rail fixed ( or rear rail fixed)
Conveyor height:900+50/-20mm (Standard height for SMT application)
For AI application, please specify the height requirements
▍Technical specification
Transfer heights | 900mm+/-50mm |
Transfer direction | Left to right |
Lifting platform Max. weight loading | Above 100kg |
Operation side | Front of machine |
Fixed rail | Front of machine |
Interface | SMEMA |
Conveyor belts | ESD flat belt |
PCB edge support | 3mm |
Magazine change over time | 30s ( optional: 15s) |
Allowable components clearance | Top 50 mm+ below 25mm |
Magazine capacity | Top 1+down 2+ middle 1 |
Safety | CE certificates |
Control | PLC |
Voltage | 220V/ 110V , single phase, 50-60Hz |
▍Specification
Model | Max. PCB ( L *W) MM | Min.PCB(MM) | Machine Dimensions (L*W*H) MM | Magazine size |
SUL-250M-E | 330*250 | 50*50 | 1815*740*1650 | 355*320*563 |
SUL-330L-E | 440*330 | 2130*830*1650 | 460*400*563 | |
SUL-390L-E | 530*390 | 2400*1020*1650 | 535*460*570 | |
SUL-460L-E | 535*460 | 2400*1020*1650 | 535*530*570 |
