loading
▍Application
The Magazine Loader is designed for loading of PCBs. The unit loads your production line automatically by pushing PCB’s out of a magazine onto the conveyor of the down-stream machine. Connect with SMT and AI productions line, safety design ensure not to break any PCB when it is pushed and thus reduce defect rate. With high accuracy, automatic counting, fault alram functions, it is required for a full range of automatic equipment.
This multi magazine loader is designed with "90 degree "to save the SMT production line length without impacting the production throughout capacity.
▍Features
Magazine capacity: Top 1+ Down 2, middle 1, total 4 magazines.
Full CE regulations safety cover
Selectable pitch 10mm up to 80mm
Auto/Manual run modes
Diameter 3mm edge Flat ESD belt
Component clearance: top 50mm bottom 25mm
Power: AC220V/110V, 50/60 HZ, 1 phase
Air Pressure: 5kgf/cm2
PCB Convey Direction: L-R (Or R-L)
Front rail fixed (or rear rail fixed)
Conveyor height:900+50/-25mm (standard height for SMT application)
For AI application, please specify the height requirements
▍Technical specification
Transfer heights | 900mm+/-50mm |
Transfer direction | Left to right |
Lifting platform Max. weight loading | Above 100kg |
Operation side | Front of machine |
Fixed rail | Front of machine |
Interface | SMEMA |
Conveyor belts | ESD flat belt |
PCB edge support | 3mm |
Magazine change over time | 30s ( optional: 15s) |
Allowable components clearance | Top 50 mm+ below 25mm |
Magazine capacity | Top 1+down 2+ middle 1 |
Safety | CE certificates |
Control | PLC |
Voltage | 220V/ 110V , single phase, 50-60Hz |
▍Specification
Model | Max. PCB( L *W) MM | Min.PCB(MM) | Machine Dimensions (L*W*H) MM | Magazine size (L*W*H)MM |
ASL-250M | 330*250 | 50*50 | 1010*1470*1650 | 355*320*563 |
ASL-330L | 440*330 | 1210*1700*1650 | 460*400*563 | |
ASL-390L | 530*390 | 1390*2110*1650 | 535*460*570 | |
ASL-460L | 535*460 | 1390*2110*1650 | 535*530*570 |
▍Application
The Magazine Loader is designed for loading of PCBs. The unit loads your production line automatically by pushing PCB’s out of a magazine onto the conveyor of the down-stream machine. Connect with SMT and AI productions line, safety design ensure not to break any PCB when it is pushed and thus reduce defect rate. With high accuracy, automatic counting, fault alram functions, it is required for a full range of automatic equipment.
This multi magazine loader is designed with "90 degree "to save the SMT production line length without impacting the production throughout capacity.
▍Features
Magazine capacity: Top 1+ Down 2, middle 1, total 4 magazines.
Full CE regulations safety cover
Selectable pitch 10mm up to 80mm
Auto/Manual run modes
Diameter 3mm edge Flat ESD belt
Component clearance: top 50mm bottom 25mm
Power: AC220V/110V, 50/60 HZ, 1 phase
Air Pressure: 5kgf/cm2
PCB Convey Direction: L-R (Or R-L)
Front rail fixed (or rear rail fixed)
Conveyor height:900+50/-25mm (standard height for SMT application)
For AI application, please specify the height requirements
▍Technical specification
Transfer heights | 900mm+/-50mm |
Transfer direction | Left to right |
Lifting platform Max. weight loading | Above 100kg |
Operation side | Front of machine |
Fixed rail | Front of machine |
Interface | SMEMA |
Conveyor belts | ESD flat belt |
PCB edge support | 3mm |
Magazine change over time | 30s ( optional: 15s) |
Allowable components clearance | Top 50 mm+ below 25mm |
Magazine capacity | Top 1+down 2+ middle 1 |
Safety | CE certificates |
Control | PLC |
Voltage | 220V/ 110V , single phase, 50-60Hz |
▍Specification
Model | Max. PCB( L *W) MM | Min.PCB(MM) | Machine Dimensions (L*W*H) MM | Magazine size (L*W*H)MM |
ASL-250M | 330*250 | 50*50 | 1010*1470*1650 | 355*320*563 |
ASL-330L | 440*330 | 1210*1700*1650 | 460*400*563 | |
ASL-390L | 530*390 | 1390*2110*1650 | 535*460*570 | |
ASL-460L | 535*460 | 1390*2110*1650 | 535*530*570 |